Corrosion-resistant application of titanium metal in pharmaceutical production
Mar 28, 2025
Leave a message
The pharmaceutical industry is an important industry related to people's physical and mental health. It includes pharmaceuticals, medical machinery, sanitary materials, and other fields, and occupies an important position in the national economy. Titanium is widely used in the pharmaceutical industry because it is non-toxic and harmless and has good compatibility with the human body.
In pharmaceutical production, pharmaceutical equipment is often in contact with inorganic acids, organic acids and salt substances such as hydrochloric acid, nitric acid, and sulfuric acid, which causes the equipment to be frequently damaged due to corrosion. Traditional steel equipment will release iron ions during use, which will contaminate the product and affect the quality of the medicine. The use of titanium equipment solves this problem well.
Vitamin B1, thiamine hydrochloride, is a hydrochloride drug that contains a large amount of free chloride ions. This ion has a significant corrosive effect on stainless steel. If stainless steel equipment is used to produce vitamin B1 for less than half a year, corrosive substances may appear in the finished drug, seriously damaging the quality of the drug.
In contrast, the corrosion resistance of titanium is far superior to that of stainless steel. The corrosion rate of industrial pure titanium TA3 is extremely low, only 0.00088mm/a. Therefore, the pharmaceutical industry began to try to use titanium equipment. For example, in the production process of vitamin B1, after using titanium screw feeders, cyclone separators, vortex bodies, hoppers, discharge pipes, and titanium linings in the tail gas box, the qualified rate of vitamin B1 increased from the highest 95% to 100%, and no corrosion was observed in the use of titanium equipment for more than seven years.
In addition to vitamin B1, titanium is also widely used in the production of other chemical synthetic drugs. For example, titanium heat exchangers, rising film concentrators, titanium nitration reactors and titanium centrifuges are used in the production of chloramphenicol, metronidazole, analgin and other drugs.
In 1980, Wuhan Pharmaceutical Factory took the lead in conducting a titanium hanging sheet experiment, placing titanium sheets in severely corroded pyrazolone hydrolysis equipment. After two months of experimental observation, the weight loss of the titanium sheet was almost zero, and there was no sign of corrosion. This experimental result further confirmed the corrosion resistance of titanium metal in pharmaceutical production.
Since then, Wuhan Pharmaceutical Factory and other pharmaceutical companies have begun to widely use titanium equipment. In the chloramphenicol recovery process, a set of titanium alloy rising film concentrators was manufactured; in the chloramphenicol centrifugal filtration process, a titanium centrifugal filter was used; in the production process of anthelmintic tetramisole and nitrochlorophenol, titanium equipment such as titanium anchor agitators and titanium filter presses were also used.
The use of these titanium equipment not only improves the qualified rate of drugs but also significantly extends the service life of the equipment. For example, in the process of producing tetramisole, the life of steel equipment is extremely short because the equipment needs to contact highly corrosive media such as hydrochloric acid and hydrochloride. After the Hanjiang Pharmaceutical Factory applied the titanium filter press, the operation effect over the years was very significant, and the product rate was increased to 100%. Similarly, in the process of producing the veterinary drug nitrochlorophenol, the titanium anchor agitator used was not found to have any corrosion phenomenon, and it operated normally, solving the long-standing problem in production.
In summary, the corrosion-resistant application of titanium metal in pharmaceutical production is of great significance. It not only improves the quality and qualified rate of drugs but also reduces the cost of equipment maintenance and replacement, making an important contribution to the development of the pharmaceutical industry.
Send Inquiry







