Pass rolling technology and characteristics of titanium alloy bars, wires and profiles

Nov 21, 2024

Leave a message

Pass rolling technology and characteristics of titanium alloy bars, wires and profiles

 

This article will introduce in detail the pass rolling technology and characteristics of titanium alloy bars, wires and profiles.
Pass rolling is a processing method that applies rolling force to metal materials through rotating rollers to cause plastic deformation. During the pass rolling process of titanium alloy, the rolled piece (that is, the titanium alloy material to be processed) is fed between the rotating rollers and gradually deforms under the extrusion of the rollers until it reaches the required shape and size. 

titanium rod
Pass rolling of titanium alloy bars, wires and profiles has the following notable features:

 

1. Uneven deformation. Due to the difference between the rolled piece and the pass shape, the natural extension of the rolled piece at each point along the width direction will be inconsistent. , resulting in uneven deformation. This uneven deformation may affect the mechanical properties and surface quality of the material, so rolling parameters and pass design need to be strictly controlled during the rolling process to ensure uniform deformation of the material.

 

2. It is prone to overheating.

 

3. High production efficiency but the rolling method of tools with complex pass shapes has the advantage of high production efficiency because multiple rolling passes can be completed at one time, thereby reducing the production cycle and cost. However, rolling tools are relatively complex and require precise design and manufacturing to ensure the accuracy and stability of the pass pattern. In addition, for titanium alloy profiles with many varieties and specifications and small batches, a large number of hole patterns of different specifications and shapes are required. After changing the pass pattern, the rolling mill needs to be adjusted and calibrated, which is labor-intensive and time-consuming, and increases production costs. Therefore, most titanium alloy profiles are not produced by pass rolling method, but other processing methods that are more suitable for small batch production.
4. The transverse width is larger than that of steel.

yuanzekai metal

Send Inquiry