GR3 Titanium Wire

GR3 Titanium Wire

Products Description Industrial pure titanium refers to several grades of unalloyed titanium with varying impurity contents, such as Fe, C, N, O, etc., which cannot be strengthened through heat treatment. GR3 titanium alloy has excellent formability and is easy to weld and braze. GR3 offers...
Send Inquiry

Products Description

 

Industrial pure titanium refers to several grades of unalloyed titanium with varying impurity contents, such as Fe, C, N, O, etc., which cannot be strengthened through heat treatment. GR3 titanium alloy has excellent formability and is easy to weld and braze. GR3 offers higher strength than GR2 and GR1. The working temperature of gr3 titanium wire is approximately 300℃, and its strength level exceeds 540 MPa.

 

Material Standards:
GB/T 3625.1-2007, ASTM F136, ASTM B265

Supply Condition:
Hot-rolled, cold-rolled, annealed, smooth finish, mirror finish

Chemical Composition (%):

Element Ti Fe Si C N H O
GB/T 3620.1-07 Balance ≤0.30 ≤0.15 ≤0.10 ≤0.05 ≤0.015 ≤0.20

 

Physical Properties at Room Temperature:

Resistivity: 470 Ω·mm²/m

Melting Point: 1660℃

Coefficient of Linear Expansion: 9.0×10⁻⁶ /K

Thermal Conductivity: 16.8 W/(m·K)

Specific Heat Capacity: 550 J/(kg·K)

Elastic Modulus: 110 GPa

Density: 4.5 g/cm³

Mechanical Properties:

Tensile Strength: ≥500 MPa

Yield Strength: 380–550 MPa

Elongation: ≥20%

Reduction of Area: ≥40%

Heat Treatment State: Annealed

Cold Deformation Angle: 90°

 

GR3 Titanium wire process:
It can be forged, extruded, rolled, and cold-drawn. The hot working temperature is between 800–900℃. Proper lubrication and prevention of air intake are important. Intermediate annealing is required when the cold working rate reaches 30–60%.

 

GR3 Titanium wire Heat Treatment:
It is generally used in the annealed condition.

Recommended Annealing: 670–720℃ for 0.5–2 hours

Stress Relief Annealing:

530–550℃ for 0.5–1 hour

or 470–490℃ for 2–4 hours

 

GR3 Titanium wire Welding:
Argon-shielded arc welding is commonly used. Plasma welding, resistance welding, and gas-shielded diffusion welding are also applicable.

 

Applications of GR3 Titanium wire:
Used for manufacturing various non-load-bearing parts, particularly components operating at temperatures up to 300℃.

 

Alternative Names:
GR3 Titanium Alloy, GR3 ELI Titanium Alloy, GR3 (American Standard), TP450 (Japanese Standard)

 

Hot Tags: gr3 titanium wire, China gr3 titanium wire manufacturers, suppliers, factory, thin titanium wire, titanium welding wire, gr2 titanium wire

Send Inquiry